Latest Versions
No MicroSD Card Adapter
Guide Information
Access your microSD card without an adapter. Can be used to put CFW files on your microSD.
- 10+ Minutes
- Unpatched Switch Only
What You Need
- Unpatched Switch
- MicroSD Card (64GB+)
- TegraRcmGUI
- USB Cable
Access Files On MicroSD Card
- Download the software from the link below.
- Extract the TegraRcmGUI_vx.x_portable.zip folder to your desktop. Open it and run TegraRcmGUI.exe.
- Go to Settings > Install Driver > follow the installer instructions to install the APX Device Driver. Click the Payload tab once it’s installed.
- Remove the right joy-con and insert the jig, and push it all the way down into the bottom of the joy-con rail.
- Press and hold the Volume + button for 2 seconds, continue to hold, select the Power button then let go of both buttons. Your screen should remain black and your Switch will be in RCM.
- Remove the jig and reconnect the right joy-con.
- Connect your Switch to your PC using a USB cable, you will see RCM O.K in TegraRcmGUI.
- In TegraRcmGUI, click on the Tools tab and make sure the MMC – SD Card is selected to mount. If it isn’t use the dropdown menu to select it.
- Click on the USB icon and your microSD card will now be accessible in the file browser on your PC.
- When you are finished managing the contents of your microSD card, hold the power button on your Switch for 7 seconds to disconnect the connection to your PC. You will need to reboot your Switch after disconnecting.
⚠️ Warning ⚠️
Modifying your Switch is dangerous. It can lead to account bans, which will prevent you from accessing Nintendo's online services and can also lead to potential console bricks. If you decide to modify your Switch in any way, we take no responsibility for any damage you cause to your switch. If you have any questions, or need help getting started, you can join our discord server by clicking the link above.